HP Printer Cartridge Problem and their solution!
When an HP Printer starts to print strange things or if it has trouble starting up, you could have a HP printer cartridge problem. Typically, printers will stop working for one of two reasons. Firstly, the head of the cartridge is dirty (which can be cleaned with a damp cloth) or the cartridges themselves may have a problem. This article explains the best ways to solve this common printer problem. I hope that you find this article helpful and it helps you determine what your next step is.
First, turn off your printer and then turn it on for a
few seconds. After doing this, check to make sure that the head of your
cartridges is clean. If not, you should proceed to the next step in this
article. Firstly, open up the cover in the cartridges so that you can get at
the cartridges themselves.
Lint-Free Surfaces - If you are dealing with a lint-free
surface, you will need to take out the lint filter that is placed over the ink
of your cartridges. You will probably notice that there is a small amount of
lint that is stuck to the screen. You will need to gently wipe this away. The
next thing that you need to do is remove the toner cartridge which is sealed in
the top center of the case. Take the toner with you and make sure that you do
not break it as this is not only against the law, but also very difficult to
replace
Comments
Post a Comment